SuperPro 7100 Advanced Gang Programmer 10 times higher than SuperPro 5000 4 eMMC

Description

SuperPro 7100 Advanced Gang Programmer 10 times higher than SuperPro 5000 4 eMMC
Description
SuperPro 7100 Advanced Gang Programmer
10 times higher than SuperPro 5000 for eMMC
Same programming design as SuperPro 7000
Support NAND FLASH, NOR FLASH, Serial EEPRO/FLASH and more
Ultra-high programming speed.
Programs four devices in parallel.
PC hosted, network and stand-alone(no PC required)
Manage up to 12 programmers in one GUI
Industry grade quality and reliability.
CE and RoHS
Compliant
Same programming engine with SuperPro 7000
Ultra-high programming peed. 10 times higher than SuperPro 5000 for eMMC
96-pin driver
Industry grade quality and reliability. IC manufacturer approved programming algorithms
Supports NAND FLASH, NOR FLASH, Serial EEPROM/FLASH/NAND, and eMMC. Supports devices with Vcc as low as 1.2V
Support up to 4 chips in parallel
Many safety mechanisms are built including self-calibration, self-diagnosis, wrong chip placement detection, poor-pin-contacting detection, ID checking, over-current and over-voltage protection etc
Triple operation modes for various application requirements.   1）PC hosted mode. The programmer is controlled by PC via USB2.0;  2）Stand-alone mode. The programmer is controlled via a 6-Key keypad and a 20 character by 4 line LCD display. A SD card is used to store the project files.  3） Network mode. With the LAN port it’s an easy job to connect the programmer to LAN or Internet
Advanced and powerful software functions.
Production mode
starts chip operation at the moment the chip is inserted in the socket properly
Project function
simplifies processes such as device selection, file load, device configuration setting, program option, and batch file setting into one touch step. Barcode management automatically load project files to avoid manual mistakes
Password
can be set for project files and production volume control
Batch command
combines device operations like program, verify, security into a single command at any sequence
Dynamic buffer
makes it possible that each chip is programmed with different data file. Applications including serial number, MAC address etc
Log file and statistic table
for quality tracking
File Security
by SD card and project file passwords, volume limit and network remote control
Gang expansion
Up to 12 programmers can be managed under one GUI as one concurrent production programmer
WINDOWS XP/Vista/Win7/ Win8 compatibility
Users can operate multiple programmers simultaneously for high volume production environments. Clustering programmers provides flexible and lowers cost for
volume production.
Optional SD card is necessary to store user data and device algorithm in stand-alone operation. For most operations, 2-4GB SD cards are recommended
Devices Supported
: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc...
Package
: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...
PC interface
: USB2.0 (High speed), LAN(10DM)
Stand-alone Storage Media
: SD Card
Keypad and Display
: 6 key keypad, 20Character x 4l Line LCD
Power supply
: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
Main unit
: Dimensions 184(L) * 160(W) * 78(h) mm; Weight 1.8 lbs (0.8 Kg)
Package
: Dimensions 310(L) * 250(W) * 145(H) mm; Weight 3.6 lbs (1.65 Kg)
Temperature
: 0-40°C
Humidity
: 20%-80%
Shipping: ship from our USA warehouse, US order ship by Fedex Ground with track# , other order ship by air mail with track #, thank you
XELTEK updates software and device algorithm regularly.
Download the current software version free of charge at
Download Center
.
Updates are available by mail at a nominal charge.
XELTEK also adds
devices upon customer's request
at its option.
Payment
Paypal
eBay Cross Border Trade powered by Channel Effect